seamless pipe
valve manufacturers

H2013KC

FEATURES

  1. Tube port, 1/2″~2″ (DN15~DN50)
  2. W. P.: 1000 WOG(PN63)
  3. W. T.:-20℃ ~200℃ (-4℉~392℉)
  4. Investment casting
  5. Blow-out proof stem
  6. Live-loading design
  7. Anti-static device (option)
  8. Cavity filled seats (option)
  9. Locking device
  10. ISO 5211 Mounting pad

2013KC-BPE

  1. Clamp end castings have low sulphur content of 0.005-0.017%
   
ITEM PARTS MATERIAL
1 BODY ASTM A351-CF3M
2 CAP
3 BALL
4 STEM ASTM A276-316L
5 SEAT TFM1600
6 SEAL PTFE
7 THRUST WASHER
8 PACKING
9 GLAND RING AISI 304
10 BELLEVILLE WASHER AISI 301
11 LOCKING WASHER AISI 304
12 STEM NUT
13 BOLT
14 NUT
15 STOP PIN
16 HANDLE
17 HANDLE SLEEVE PVC
 
DN L H W d D C m M S ISO 5211 Torque(N-m)
Breakaway Action
15 88.9 53.5 114 9.4 25.4 36 M5 3/8″~24UNF 5.7 F03 4.52 3.39
20 101.6 55 114 15.75 25.4 36 M5 3/8″~24UNF 5.7 F03 4.52 3.95
25 121.9 66 146 22.1 50.4 42 M5 7/16″~20UNF 7.5 F04 4.52 3.95
32 130 70 146 28.5 50.4 42 M5 7/16″~20UNF 7.5 F04 7.91 5.65
40 139.7 81 178 34.8 50.4 50 M6 9/16″~18UNF 8.6 F05 28.25 19.21
50 158.8 89.5 178 47.5 63.9 50 M6 9/16″~18UNF 8.6 F05 28.25 19.21

unit:mm
NPS L H W d D C m M S ISO 5211 Torque(IN-LB)
Breakaway Action
1/2″ 3.5 2.11 4.49 0.37 1 1.42 M5 3/8″~24UNF 0.23 F03 40 30
3/4″ 4 2.17 4.49 0.62 1 1.42 M5 3/8″~24UNF 0.2 F03 40 35
1″ 4.8 2.6 5.75 0.87 1.98 1.65 M5 7/16″~20UNF 0.3 F04 40 35
1-1/4″ 5.12 2.76 5.75 1.12 1.98 1.65 M5 7/16″~20UNF 0.3 F04 70 50
1-1/2″ 5.5 3.19 7.01 1.37 1.98 1.97 M6 9/16″~18UNF 0.34 F05 250 170
2″ 6.25 3.53 7.01 1.87 2.52 1.97 M6 9/16″~18UNF 0.34 F05 250 170

unit:in

PAGE 1 2

Leave a Reply